Picture two masses in space where it is possible to move them around at will.
If you double the distance between them there is a reduction in the gravitational attraction between them proportional to the square of the distance.
But if you now reduce the distance between them by half there is a four fold increase in the gravitational attraction between them.
What a strange state of affairs…and for a long time the standard answer to this puzzle has been; nobody knows why.
If however gravity is not itself an actual force but simply a dynamic response to an underlying force of energy focused to the center of both bodies of mass and that force of energy is accelerating inward to the core of both bodies of mass we can see why there is such a dramatic increase in gravitational attraction between them when the distance between them is reduced by one half.
Gravity is the dynamic effect of an accelerating force of energy focused to the core of any mass.
So gravity is accelerating symmetrically to the surface curve of each mass while at the same time decelerating isometrically into space from the surface curve.
Therefore the mystery is solved and we can no longer shrug our shoulders and say nobody knows why.
It is important to point out though that gravity itself does not increase from the surface curve to the center of mass, yet the underlying force of energy affecting gravitational attraction and gravitational acceleration does accelerate to the center of mass.
The internal and external dynamics affecting the form and function of physical structure remain inversely proportional whereby gravity increases isometrically from the center of mass to the surface curve just as it increases symmetrically from the depths of space to the surface curve.
Also the increase in gravity from the center of mass to the surface curve is slightly greater at the surface curve than the increase in gravity from the depths of space to the surface curve, which allows for expansion corresponding to the expansion of universe.
A mechanical solution to the Field Frequency Modulator, and a presentation of initial drawings by the Gwandau team.
Based on David Barclays unparalleled and truly relativistic NTFFA-theory presented in his paradigm shifting book Unity, we at the Gwandau Team have taken our first steps in the realization of a Field Frequency Modulator.
A Field Frequency Modulator, or FFM, is designed to refract and focus the very underlying field which projects and sustains the existence of all matter, time and space in our universe.
The action of this underlying field, described by David Barclay in his Unity theory as the Non Linear Time Field Frequency Acceleration, is creating interactive responses known as gravity and electromagnetism.
By refracting and focusing this underlying field through the means of an FFM, the idea is to create a self contained unified field system, thus detaching the FFM from the surrounding unified field system of Earth.
According to the NTFFA-theory, magnets are not themselves the very origin of their attractive and repulsive qualities, but merely acting as a sort of lens refracting the underlying field, where the appearance of attraction and repulsion is caused by a decrease or increase of space created between the poles of the magnets.
Since contemporary science still does’t know what electromagnetism is, and fails to give a satisfactory explanation why a magnet creates attraction, it seems highly important to put David Barclays theory to a proper test.
Furthermore, a success in this attempt will have such a deep impact on the future of humanity that a complete new chapter in the history of mankind will evolve. So there is nothing to lose and everything to gain.
Basic structure of the FFM Focus Finder – Top View
Building a Field Frequency Modulator is a true challenge in many ways, both regarding the mechanical challenge and all unknown parameters involved..
Since we are exacting high demands on simplicity and functionality it has
taken some time to boil it down to the present solution.
Regarding functionality we are well aware that the less unknown parameters
added, the less the risk of distortion of wanted effects.
The following parameters had to be avoided in our FFM-alternative:
1. No metals of any kind or other eddy-field creating materials.
2. No electric or electronic device inside the FFM.
3. No outside energy source creating the continuously changing magnet positions.
The following parameters had to be included in our FFM-alternative:
1. A mechanical structure consisting of hardy enough material to withstand the
magnetic forces created between the neodymium magnets.
2. Simultaneous and equally strong momentum applied on each magnet holder
mechanism, to secure uniformity in the positioning of the magnets.
3. Ability to alternate the degree of cone angel of the four tiered construct,
thereby highly enhancing the focal possibilities.
4. The construct made of pieces easily dismantled and reconfigured if needed.
Furthermore we have decided to make our initial construct solely aimed for running test series harvesting through all the possible angels of magnet position.
This construct is designed to integrate both angular movements of the magnets simultaneously. We have also decided for this initial FFM-construct due to its relative simplicity regarding moving components.
The only annoyance with this solution is that the magnets will continuously pass earlier positions during its travel through all possible positions.
The geometrical path of this movement is somewhat similar to how a ball of yarn is winded.
click the above images for full size
Above two positions of the magnet holder assembly turned by vertical axis, with gear wheel (purple coloured) circulating on the non moving gear ring (red coloured), thus creating a simultaneous change in positions of both the vertical and the horizontal plane.
I must emphasize that this initial prototype is only meant to use for finding the focus positions and mapping them.
(Next step is to build a more complicated prototype enabling us to put the magnets into the desired positions by immediate action. The third step is to build a FFM inside a vehicle able to carry persons and withstand vacuum and cosmic radiation.
This first prototype, which we call The “FFM Focus Finder”, are only in the stage of a SolidWorks sketch form, which means that these drawings still need to be redrawn with exact relationships regarding metric values.
So remember, these are only sketches.
Close-up of the fourth tier consisting of 38 magnets
By using the relationship between number of tooth on interacting gear wheels relative to 360 degrees we are able to create a magnet position movement that covers all possible positions.
Fourth tier with 38 magnets
Presently we are working with drawings incorporating the encircling toothed arc, which is responsible for the simultaneous movement of all magnets on the tier, and the most simple and effective way of applying an equal momentum on each of the toothed arcs fed by a main gearwheel. Some clockwork thinking here…
3rd tier 32 magnets
2nd tier 24 magnets
1st tier 16 magnets
Furthermore we are discussing different ways of equally changing the distance between the four tiers, thus changing the angle of the cone-shaped FFM.
Schematic view of all four rings assembled in a possible tier configuration.
Geometrically there is 360 degrees turning path relative the horizontal plane for every degree positioning relative the vertical plane.
But you only need to turn the magnet 180 degrees in any plane, since the opposing rotational plane is supplementing the full 360 degree positioning.
This means 180 times 180 one-degree positions which are 32400 positions. Let’s say the test series travels with the speed of one degree per second. Then a full test series would in theory take 540 minutes, which is 9 hours. Not too bad.
But the test series of this FFM is far from complete without adding the parameters of the conical angel of the four tier construct.
By changing the distance between the tiers we are changing the angel of the Tier-cone, but this has to be done one step at a time for
every full 9 hour test series of magnet positioning. This means 9 hours times the number of tier distance steps performed, and as you can see, this escalates the duration of test series significantly.
Our major mountain to climb in this quest will be the solution of the power source, which has to be able to create enough torque to drive the four tier clockwork at a reliable and fully controllable speed, thus making it possible for us to calculate and retrace the exact position of the magnets in relation to the time log registered in the computer.A power source strong enough to achieve this has to be driven by electricity and made of metal. All other alternatives has proved to be to too weak or unreliable in regard to the need for a controlled motion of the magnets.
Since this power source has to be situated inside the FFM and we have decided not to have any metals and electric or electronic devices present in the space where the neodymium magnets are supposed to refract and focus the underlying field, we are discussing different ways of working around this obstacle.
One possible solution is to place the power source in a shielded compartment within the main FFM casing, but below the actual space where the magnets are placed.
The material used for the casing of the FFM Focus Finder is another matter for discussion. A major criteria for a success in creating a self contained unified field system according to David Barclays NTFFA theory is that the FFM is completely encapsulated.
Here the choice of material arises. In my own opinion a material not affected by the electromagnetic field will not be able to carry forth the mission of creating the boundary necessary in initializing a self contained unified field system.
I base this assumption on the mere fact that a FFM is indirectly activated by means of electromagnetic geometry, therefore it is highly possible that the interactive properties of the casing in creating a self contained unified field system is due to its response to the electromagnetic field.
Since all known metals in some way are affected by electromagnetism, some metals are directly responding to the magnetic field, like iron, some metals like copper by creating eddy fields, thus we have to decide which metals to use for the FFM casing in our first tests.
Personally I am convinced that the material of the casing should be as highly eddy field responsive as possible.
Additionally I recall certain findings said to be external parts of a UFO casing, found and up until today kept out of reach from the authorities since the finding near Roswell, New Mexico 1947.
This material was analyzed and put to several tests, including being exposed to an electromagnetic field. The layering consisted of layers of 1-4 microns bismuth, alternated with layers of 100-200 microns of almost pure magnesium. The samples have a total of 25 layers. The bismuth is 100 percent pure, the magnesium-zinc is 97.6 percent magnesium and 2.4 zinc.
This material has the peculiar qualities of being unaffected by the electromagnetic field if positioned with the outmost bismuth layer towards the electromagnetic field, but on the contrary, if placed with the bismuth face away from the electromagnetic field, the material started to behave with motion and action not like known materials.
If this information is valid, it indicates a need for a layered casing that is creating a shield from electromagnetism on one side and highly eddy field reactive on the other surface.
Since the attempts to recreate this material was unsuccessful due to the technical difficulties in producing the thin layers, we are stuck with a compromise, if we are to follow this lead.
As you can see, there is a long road to go, with a lot of unknown parameters and obstacles yet to come. Still this is as far as I am concerned the absolutely most intriguing road I have ever walked in my life.
If you consider yourself a person of an open mind and a reasonable intellectual capacity, then give yourself a fair chance to assimilate the NTFFA theory by David Barclay.
Living in a phase in humanity where duality and linearity are dominating more than ever, we need a combined effort to remove the blindfolds from our fellow travellers on spaceship Earth, before it´s too late. Welcome on the ship.
Gwandau
A unified field theory is the big cup-cake in physics, a theory of everything.
But how does gravity fit into the picture?
I have to laugh or at least smile at this one, as gravity is not part of the problem. Gravity is not itself a force of any kind whatsoever…in fact we could simply drop gravity altogether and nothing would change because gravity itself does nothing, absolutely nothing.
Gravity is a word we use to describe a dynamic effect occurring as a response to the underlying force of universe, non-linear time field frequency acceleration.
Electromagnetism is also an effect of this same force.
There is only one force of universe, while there are many effects. So what we have is a single cause and numerous effects.
A unified field theory is not at all complicated…in fact it is fairly simple and straight forward.
But there is a trick to developing a unified field theory as it must include the known laws of physics…..but if some of those laws are less than accurate a unified field theory might appear to be impossible.
Imagine if you will a world without multiple forces…but one single force.
A stand alone force of energy inherent to every system of universe…including both the very small and the very big.
An infinite number of unified fields remaining relative to the system of reference.
And to put both form and function to work we have a dynamic underlying force of energy which is continuously accelerating symmetrically to the center of each and every system of universe.
But where is the math?
The math is very simple in terms of a non-absolute dynamic framework…as there is an upper non-absolute limit and a lower non-absolute limit associated with each and every unified field system. Therefore all measurable proportions of time, space and motion are less than one and greater than zero in terms of a condition of universe remaining relative to the system of reference.
This allows us to evaluate a relative relationship for each and every system of universe remaining relative to the system of reference and in this respect there is a different relative relationship for each and every system of universe remaining relative to the system of reference and a different relative relationship for the system of reference remaining relative to each and every system of universe.
This gives us a multiverse where both past and future conditions remain relative to the system of reference.
A unified universe consisting of an infinite number of unified field systems existing simultaneously.
A unified field is just that, a unified field…supported by a single force of energy sustaining and perpetuating the form and function of all physical phenomena.
And in this respect the generally accepted idea of energy being proportional to mass can be viewed only in terms of a general rule as energy is not proportional to mass. In fact the smaller mass of a similar material will have a higher ratio of energy per unit of mass while the larger mass of the same material will have more energy but a lower ratio of energy per unit of mass.
And in terms of those elements denoted on the periodic table, hydrogen has the highest ratio of energy per unit of mass of any known element. The heavy elements therefore have much lower ratios of energy per unit of mass.
So a unified field theory must also define the relationship of energy to mass.
The simplicity of nature allows the universe and the components of universe to exist and function without failure.
Unified field systems existing within a unified universe…in other words fields within a field.
